Railway Age Gazette, Volume 63

Front Cover
Simmons-Boardman Publishing Company, 1917 - Railroads

From inside the book

Other editions - View all

Common terms and phrases

Popular passages

Page 228 - President, but their successors shall be appointed for terms of seven years, except that any person chosen to fill a vacancy shall be appointed only for the unexpired term of the commissioner whom he shall succeed.
Page 14 - The inspector representing the purchaser shall have free entry, at all times while work on the contract of the purchaser is being performed, to all parts of the manufacturer's works which concern the manufacture of the material ordered.
Page 228 - Said commission may, from time to time, make or amend such general rules or orders as may be requisite for the order and regulation of proceedings before it, including forms of notices and the service thereof, which shall conform, as nearly as may be, to those in use in the courts of the United States.
Page 14 - If any test specimen shows defective machining or develops flaws, it may be discarded and another specimen substituted. (c) If the percentage of elongation of any tension test specimen is less than that specified in Section 6 (a) and any part of the fracture is more than J in.
Page 32 - Board or employee designated shall have power and authority to act as to any of said work, business, or functions so assigned or referred to him for action by the Board.
Page 319 - ... shall provide for fixed charges (including fixed interest on funded debt, interest on unfunded debt, amortization of discount on funded debt...
Page 229 - An Act to regulate commerce,' approved February 4, 1887, and all Acts amendatory thereof," by providing for a valuation of the several classes of property of carriers subject thereto and securing information concerning their stocks, bonds, and other securities...
Page 107 - States a civil penalty of not more than $5,000 for each violation, which shall accrue to the United States and may be recovered in a civil action brought by the United States.
Page 13 - This analysis shall be made from a test ingot taken during the pouring of the melt. The chemical composition thus determined shall be reported to the purchaser or his representative, and shall conform to the requirements specified in section 2.
Page 14 - Bessemer steel; except that if material from one melt differs f in. or more in thickness or diameter, one tension and one bend test shall be .made from both the thickest and the thinnest material rolled.

Bibliographic information