A Practical Treatise on Rail-roads, and Interior Communication in General: With Original Experiments, and Tables of the Comparative Value of Canals and Rail-roads ... |
From inside the book
Results 1-5 of 35
Page 17
... piston , and its load ; and also upon the size of the aperture , through which the steam issues from the boiler to ... piston . I have , also , given the velocity of the piston , so that , in the B application of similar engines to ...
... piston , and its load ; and also upon the size of the aperture , through which the steam issues from the boiler to ... piston . I have , also , given the velocity of the piston , so that , in the B application of similar engines to ...
Page 125
... piston - rod was projected backwards and forwards , in the line of the road towards the front of the carriage . Across the square frame , supported by the wheel of the carriage , an axle was extended , reaching a little beyond the frame ...
... piston - rod was projected backwards and forwards , in the line of the road towards the front of the carriage . Across the square frame , supported by the wheel of the carriage , an axle was extended , reaching a little beyond the frame ...
Page 126
... piston , turned this axle round , and produced a continued rotatory motion of it when the piston was moved backwards and for- wards in the cylinder . Upon both ends of this axle cog - wheels were fixed , which worked into similar cog ...
... piston , turned this axle round , and produced a continued rotatory motion of it when the piston was moved backwards and for- wards in the cylinder . Upon both ends of this axle cog - wheels were fixed , which worked into similar cog ...
Page 129
... pistons to the con- necting rods bb , which transfer the motion to the cranks cc , turning upon axles attached to the frame of the carriage . Upon the axles on which these cranks are fixed , are also fixed the pinion - wheels d d ...
... pistons to the con- necting rods bb , which transfer the motion to the cranks cc , turning upon axles attached to the frame of the carriage . Upon the axles on which these cranks are fixed , are also fixed the pinion - wheels d d ...
Page 132
... piston- rod is projected out behind horizontally , and is attached to the leg a b at a , and to the reciprocating lever a c , which is fixed at c ; at the lower extremity of the leg ab , feet are attached , by a joint at b ; these feet ...
... piston- rod is projected out behind horizontally , and is attached to the leg a b at a , and to the reciprocating lever a c , which is fixed at c ; at the lower extremity of the leg ab , feet are attached , by a joint at b ; these feet ...
Other editions - View all
Common terms and phrases
action adhesion amount application ascending carriages ascer ascertain bearing body boiler Calculated space canal carriages moved case-hardened cast-iron rails cause chain chair coals cog-wheels colliery connecting rod considerable conveyance conveyed crank cylinder declivities deflexion descending train distance Ditto drag the rope drawing dynamometer edge-rail effect employed equal experiments fastened feet fixed friction or resistance gravitating force gravity greater groove horses inches broad inches diameter inclined plane iron rails Killingworth kind level plane lever line of road loaded carriages loco-motive engine malleable iron malleable iron-rails metal miles an hour mode motive power moving power Newcastle-upon-Tyne patent performance periphery piston placed Plate preponderance present pressure produced progressive motion proper quantity Rail-road Rail-ways ratio riages roller rubbing surface self-acting planes sheeves shew side similar sleepers sliding space passed square steam steam-engine stone tion train of carriages traversed velocity waggons weight wooden wrought-iron Wylam
Popular passages
Page 36 - The manner of the carriage is by laying rails of timber, from the colliery, down to the river, exactly straight and parallel ; and bulky carts are made with four rowlets fitting these rails ; whereby the carriage is so easy that one horse will draw down four or five chaldron of coals, and is an immense benefit to the coal merchants.
Page 124 - My attention was first directed in the year 1759 to the subject of steam-engines, by the late Dr Robison, then a student in the University of Glasgow, and nearly of my own age. He at that time threw out an idea of applying the power of the steam-engine to the moving of wheel-carriages, and to other purposes, but the scheme was not matured, and was soon abandoned on his going abroad.
Page 290 - It is far from my wish to promulgate to the world that the ridiculous expectations, or rather professions, of the enthusiastic speculist will be realised, and that we shall see engines travelling at the rate of twelve, sixteen, eighteen, or twenty miles an hour. Nothing could do more harm towards their general adoption and improvement than the promulgation of such nonsense.
Page 69 - ... to any important extent. I am inclined to think that this effect is prevented on the bearing surfaces of much used railways, by the pressure upon them. To account for their extraordinary freedom from rust, it is almost necessary to suppose, that some diminution takes place in the chemical affinity of the iron for the oxygen or carbonic acid. The continual smoothness in which they are kept, by the contact of the wheels, has the usual effect of polish, in presenting to the destroying influence...
Page 7 - ... shows very plainly that the spirits, or some of them at least, know just where the proofs of the truth of their testimony may be found by mortals, and gives us reason to hope, if not to expect, that some day the truth in relation to all these ancient matters will become known to the world generally. In order that the reader may be able to judge of the probable correctness of this very positive statement of the spirit of Chrysostom, I cite the following in relation to the Ambrosian library from...
Page 141 - This endless chain, which is now solely used upon these kind of engines, consisted at first of one broad and two narrow links, alternately, fastened together at the ends with bolts ; the two narrow links were always on the outside of the broad link ; consequently, the distance they were separated laterally would be equal to the breadth of the broad link, which was generally about two inches, and their length three inches. The periphery of the wheels, fixed upon the axles of the engine...
Page 35 - As the art to boore with, iron rodds to try the deepnesse and thicknesse of the Coale ; rare engines to draw water out of the Pits : Waggons with one horse to carry down Coales, from the Pits, to the Stathes, to the River, &c. Within few years, he consumed all his money, and rode home upon his light horse.
Page 142 - When the wheel turned round, these projecting cogs entered between the two narrow links, having a broad link between every two cogs, resting on the rim of the wheel; these cogs, or projections, caused the chain to move round with the wheel, and completely prevented it from slipping round upon the rim. When, therefore, this chain was laid upon the two toothed wheels, one wheel could not be moved round without the other moving round with it; and thus secured the proper angles to the two cranks.
Page 35 - Master Beaumont, a gentleman of great ingenuity, and rare parts, adventured into our mines with his thirty thousand pounds ; who brought with him many rare engines...
Page 132 - Upon the reciprocating line ac is fixed at 1, a rod, 1, 2, 3, sliding horizontally backwards and forwards upon the top of the boiler; from 2 to 3 it is furnished with teeth, which work into a cog-wheel, lying horizontally; on the opposite side of this cog-wheel a sliding rack is fixed, similar to 1, 2, 3, which, as the cog-wheel is turned round by the sliding rack, 2, 3 is also moved backwards and forwards. The end of this sliding rod is fixed upon the reciprocating lever d c, of the leg d «, at...